PrimeWall® EQ Track

PrimeWall® EQ Track is used with PrimeWall EQ Studs in non-load-bearing wall systems that support gypsum board construction. Like PrimeWall EQ Studs, EQ Track allows you to replace 20 gauge non-structural drywall track in most applications. Each PrimeWall EQ Track is manufactured from mill-certified steel meeting material composition requirements listed below.

Value:

  • Designed and engineered to meet standard 20 gauge applications
  • Strengthened with increased yield
  • PrimeWall® EQ Track meets the requirements of Section 5.1 of ASTM C645 for Strength

 

 

 PrimeWall® EQ Track
  
Downloads: Download Technical data Tech Sheet |
  • Quantity / Order Info
  • Physical and Structural Properties
  • Material Composition
Section
 Lbs/Ft Pcs/Skid Lbs/Skid
162PWT-20EQ 0.332
 400 1328
250PWT-20EQ 0.392 400 1568
362PWT-20EQ 0.468 300 1404
400PWT-20EQ 0.494 300 1482
600PWT-20EQ 0.630 200 1260

 

 

 

PrimeWall EQ Track Dimensions

 
Stud Member Design Thickness Min. Thickness Gross Properties Effective Properties at 50 ksi Torsional Properties
Area Weight Ix Sx Rx Iy Ry Ix Sx Ma Va Jx1000 Cw Xo Ro Beta m
(in.) (in.) (in.2) (lbs/ft) (in.4) (in.3) (in.) (in.4) (in.) (in.4) (in.3) (lbs-in.) (lbs) (in.4) (in.6) (in.) (in.) (in.)
162PWT125-20EQ 0.02 0.019 0.083 0.281 0.044 0.051 0.734 0.014 0.411 0.030 0.026 766 421 0.011 0.007 -0.887 1.222 0.473 0.503
162PWT200-20EQ 0.02 0.019 0.113 0.383 0.067 0.076 0.771 0.049 0.662 0.036 0.026 775 421 0.015 0.026 -1.586 1.883 0.291 0.869
162PWT250-20EQ 0.02 0.019 0.133 0.451 0.082 0.094 0.786 0.090 0.823 0.038 0.026 767 421 0.018 0.049 -2.065 2.358 0.233 1.116
250PWT125-20EQ 0.02 0.019 0.100 0.341 0.111 0.084 1.052 0.016 0.399 0.079 0.041 1240 295 0.013 0.018 -0.777 1.367 0.677 0.459
250PWT200-20EQ 0.02 0.019 0.130 0.443 0.162 0.123 1.115 0.057 0.661 0.089 0.041 1224 295 0.017 0.066 -1.438 1.936 0.448 0.817
250PWT250-20EQ 0.02 0.019 0.150 0.511 0.195 0.149 1.141 0.103 0.830 0.093 0.041 1218 295 0.020 0.123 -1.900 2.366 0.356 1.060
362PWT125-20EQ 0.02 0.019 0.123 0.417 0.253 0.135 1.437 0.018 0.380 0.172 0.060 1796 201 0.016 0.043 -0.672 1.632 0.830 0.413
362PWT200-20EQ 0.02 0.019 0.153 0.519 0.357 0.191 1.531 0.064 0.647 0.190 0.060 1801 201 0.020 0.153 -1.288 2.103 0.625 0.758
362PWT250-20EQ 0.02 0.019 0.173 0.587 0.427 0.228 1.573 0.117 0.822 0.199 0.060 1800 201 0.023 0.280 -1.727 2.476 0.514 0.996
400PWT125-20EQ 0.02 0.019 0.130 0.443 0.317 0.154 1.562 0.018 0.373 0.210 0.066 1982 182 0.017 0.054 -0.644 1.730 0.861 0.400
400PWT200-20EQ 0.02 0.019 0.160 0.545 0.443 0.215 1.664 0.066 0.641 0.233 0.067 1994 182 0.021 0.191 -1.246 2.176 0.672 0.740
400PWT250-20EQ 0.02 0.019 0.180 0.613 0.528 0.256 1.712 0.120 0.818 0.244 0.067 1995 182 0.024 0.349 -1.677 2.532 0.561 0.977
600PWT125-20EQ 0.02 0.019 0.170 0.579 0.826 0.270 2.204 0.020 0.342 0.486 0.098 2947 120 0.023 0.137 -0.527 2.291 0.947 0.341
600PWT200-20EQ 0.02 0.019 0.200 0.681 1.105 0.361 2.350 0.074 0.607 0.539 0.101 3023 120 0.027 0.485 -1.063 2.650 0.839 0.658
600PWT250-20EQ 0.02 0.019 0.220 0.749 1.292 0.422 2.423 0.136 0.786 0.563 0.101 3034 120 0.029 0.883 -1.457 2.934 0.753 0.884

 

Notes:

  • Section properties are calculated in accordance with AISI NASPEC 2001 with 2004 Supplement.
  • Tabulated gross properties are based on the full, unreduced cross section of the stud away from punchouts.
  • Effective section properties don't incorporate strength increase from cold work of forming.
  • Effective moment of inertia Ix is calculated at a stress = 0.6 Fy.

PrimeWall® EQ Track is made of cold-formed steel coils conforming to ASTM A 1003/A 1003M Structural Steel Grade 50 (340), with 50ksi (340MPa) minimum yield strength and 65ksi (450MPa) minimum tensile strength. Coating is G40 (Z120) hot-dipped galvanized, or equivalent conforming to ASTM C 645. Steel material with G60 and G90 coating are available upon request.