StiffClip® JH

The StiffClip® JH, joist hanger connects floor joists to beams. StiffClip JH resists vertical loads. Design loads consider clip strength only. Size and number of fasteners used is based on fastener manufacturer’s allowable load data.
Features
  • Faster joist installation
  • Guide holes for attachment to beam and screw placement to member (0.172” in diameter)
  • Engineered for steel joist
  • Structurally load tested
  • Eliminates need for joist web stiffener at clip connection
Order Information

Order Information

Designation Qty/Box Lbs/Box Qty/Skid Lbs/Skid
JH600x200-68 25 30 375 450
JH800x200-68 25 49 375 735
JH1000x200-68 25 58 375 870
JH1000x200-97 15 50 375 1,250
JH1200x200-68 25 66 375 990
JH1200x200-97 15 57 375 1,425

 

Nomenclature
StiffClip JH is designated by listing the joist depth in inches, followed by the inside flange dimension in inches x 100 (2” flange is standard, and will also service 1 ⅝” flange), and the required clip thickness in mils that will accommodate anticipated loads.

Example: 6” joist, 2” flange, 2,250 lbs. load
Designate: StiffClip® JH600x200-68

Material Composition
ASTM A1003/A1003M Structural Grade 50 (340) Type H, ST50H (ST340H): 50ksi (340MPa) minimum yield strength, 65ksi (450MPa) minimum tensile strength, with ASTM A653/A653M G90 (Z275) hot dipped galvanized coating.
Catalogs
TSN’s Product Catalogs are an essential resource for the design of cold formed steel. Developed by Engineers, the catalogs contain design data for members, connectors, and fasteners. StiffClip® JH can be found in the following Catalogs:

TSN Cold-Formed Steel Framing Connections Order Catalog

TSN Connections Technical Catalog

TSN Cold-Formed Steel Framing Connections Technical Catalog

TSN Connections Order Catalog

For a full list of our product catalogs, specification sections, inspection checklists, and research reports please click here.

StiffClip® JH Downloads

StiffClip® JH Applications

The unique design of MasterClip allows it to be installed either as a vertical deflection connection or a rigid connection.  Attachment to the primary structure may be made with a PAF, screw/bolt anchors, or weld and is dependent upon the base material (steel or concrete) and the design configuration.

StiffClip JH - Joist Hanger - Application

Joist Connection to Steel Beam

Installation Instructions

  1. Attach StiffClip JH to beam with required fasteners. Use blocking behind clip if clip length is less than beam depth.
  2. Place joist on ledge of StiffClip JH and attach clip to joist with required screws.

Allowable Loads

F3 Load Direction
JH600-68 JH800-68 JH1000-68 JH1000-97 JH1200-68 JH1200-97
Screw Patterns with #12 Screws
2 screws 3 screws 4 screws 4 screws 5 screws 5 screws
33mil (20ga), 33ksi Stud 638 474 N/A N/A N/A N/A
33mil (20ga), 50ksi Stud 638 474 N/A N/A N/A N/A
43mil (18ga), 33ksi Stud 1,416 1,051 836 836 N/A N/A
43mil (18ga), 50ksi Stud 1,416 1,051 836 836 N/A N/A
54mil (16ga), 33ksi Stud 2,575 2,091 1,661 1,661 1,377 1,377
54mil (16ga), 50ksi Stud 2,575 2,091 1,661 1,661 1,377 1,377
68mil (14ga), 33ksi Stud 2,575 2,575 2,575 3,345 2,575 2,771
68mil (14ga), 50ksi Stud 2,575 2,575 2,575 3,345 2,575 2,771
97mil (12ga), 33ksi Stud 2,575 2,575 2,575 4,167 2,575 4,167
97mil (12ga), 50ksi Stud 2,575 2,575 2,575 4,167 2,575 4,167
118mil (10ga), 50ksi Stud 2,575 2,575 2,575 4,167 2,575 4,167
Maximum Allowable Clip Load 2,575 2,575 2,575 4,167 2,575 4,167

Notes:

  • Design loads are for attachment of StiffClip JH to joist only. Load tables reflect vertical loads (F3).
  • StiffClip JH resists vertical loads and web crippling.
  • Design loads are based on clip capacity and allowable shear of joist section.
  • Screw size and quantity shown is required for StiffClip JH to serve as a joist web stiffener.
  • If joist web is larger than clip height then use blocking behind clip for support.
  • Allowable loads have not been increased for wind, seismic, or other factors.
  • Screws, powder actuated fasteners, or weld attachment may be used to oconnect StiffClip JH to steel headers or beams. StiffClip JH-68 and heavier can be welded to a supporting steel beam. Powder actuated fasteners into steel are recommended to be 0.157″ diameter, and are limited to a maximum of 3/4″ subtrate thickness.
  • For LRFD strengths contact TSN technical services.
StiffClip JH - Joist Hanger - Load Direction

Load Direction

Follow us on Social Media