Step Bushing Technology
|
|
 |
 |
VertiClips SLD, SL, SLB, SLS, and SLT have been issued an ICC-ES Report. (ICC-ESR-1903)
An ICC-ES Evaluation Report for DriftClip® DSLB, DSLS, DSL, DriftTrak®, DTSLB, and DTSL is available. (ICC-ESR-2049)
|
 |
A Los Angeles Research Report for VertiClip® SLD, SL, SLB, SLS, and SLT Series is available. Refer to LARR #25631.
A Los Angeles Research Report for DriftClip® DSLD, DSL, DSLB, DSLS, DriftTrak DTSL and DTSLB Series is available. Refer to LARR #25781.
|
 |
|
Step Bushing Technology
- Step Bushing Offsets Clip from Stud
- Friction-Free Structural Deflection
- Code-Compliant Load Rated Attachments
|
Generic Clip Angle
- Rigid Attachment (No Offset)
- For Movement to Occur, Screw Needs to be backed out
- If Screw is Backed Out, Screw Load Capacity Values are Nullified
|
| Factor |
Step Bushing Technology |
Generic Angle |
| Movement |
Friction-free movement |
Rigid attachment (unless screw is backed out) |
| Testing |
Structurally Load Tested (Meets ICC-ES AC261) |
If a screw is not firmly seated, load capacity is nullified |
| Code Approvals |
ICC-ESR-1903 issued for VertiClip® |
No ICC-ES Report exists for clip angle |
| Material Composition |
TSN utilizes only mill-certified, 50ksi steel |
Unknown |
| Galvanized Coatings |
Each exterior VertiClip® and DriftClip® has a G90 galvanized coating |
Unknown |
| Screw Placement |
Step Bushings are pre-installed in each clip |
No guide offered |
| Screw Type |
Rated screws are provided with each clip |
Contractor responsible for screw type used |
|
