| Vertical Deflection Connectors | |
| Head of Wall | |
 |
The VertiTrack® VT is a slotted deflection track improvement allowing for vertical movement in interior walls. VertiTrack® VT Downloads: |
 |
VertiClip® SLD (interior or exterior head of wall) VertiClip® SLD connects metal studs at the head condition (top of wall) to the deck or primary frame while allowing for a total vertical deflection of up to 1½” (¾” up and ¾” down). |
 |
VertiTrack® VTD (interior or exterior head of wall) The VertiTrack® deflection track system is used to connect the interior studs at head of wall while allowing for a vertical deflection of the structure up to 1½” (¾” up and ¾” down). |
 |
VertiClip® SL (exterior head of wall) VertiClip® SL connects the exterior curtain wall studs at head of wall to the building frame while allowing for vertical deflection of the structure up to 1½” (¾” up and down). |
 |
VertiTrack® VTX (exterior head of wall) VertiTrack® VTX deflection track connects exterior curtain wall studs at head of wall to the building frame while allowing forvertical deflection of the structure of up to 1½” (¾” up and ¾” down). |
| Bypass | |
 |
VertiClip® SLB connects exterior curtain wall studs, bypassing the building structure, while allowing for vertical deflection of the structure up to 2” (1” up and 1” down). |
 |
VertiClip® SLB-HD (seismic bypass slab) When PAF's are not allowed, VertiClip® SLB-HD connects exterior curtain wall studs, bypassing the building structure, while allowing for vertical deflection of the structure up to 2” (1” up and 1” down). |
 |
VertiClip® SLS (bypass structure) The VertiClip® SLS slide clip connects exterior curtain wall studs, bypassing the building’s structural frame, while allowing for a vertical deflection of the structure up to 1½” (¾” up and ¾” down). |
 |
VertiClip® SLT (bypass top of slab) VertiClip® SLT and SLT(L) slide clips connect exterior curtain wall studs, bypassing the building’s structural concrete slab or structural steel frame, while allowing for a vertical deflection of the structure of 1” (½” up and down for SLT) and 1.875” (0.938” up and down for SLT(L)). |
 |
VertiClip® SLF (bypass top of slab) The VertiClip® SLF is used to accommodate vertical deflection requirements for connections between light steel framing and the primary structural system in a bypass condition when the stud web is inaccessible. VertiClip® SLF Downloads:
 Tech Sheet |  DWG | |
 |
VertiClip® Splice (exterior bypass slab) The VertiClip® Splice series is used when connecting a bypass rigid stud to structure while simultaneously attaching another wall stud below, allowing up to 2” vertical deflection of the structure. |
BIM
